FOAM 1 & 2 Classic
Catalog/Part Number:: 941643
Description
ASTM D 892 - D 6082 - IP 146 - ISO 6247
The Foam instruments are used to detect undesirable foaming characteristics in lubricating oils, which could cause inadequate lubrication, overflow and cavitation. To avoid mechanical failure, the test measures the foaming characteristics of lubricating oils at different temperatures by empirically rating the foaming tendency and the foam stability.
FEATURES: Foam performs two tests at 24°C and two tests at 93, 5°C. The instruments are equipped with 2 heat resistant glass jars (with temperature controller), 2 flow meters, 2 cylinders (1000 ml), immersion heater, stirring system air delivery tubing and thermometer. Cold bath has built-in coils for circulating exit air from the high temperature test cylinders. For operator’s safety, Foam HT allows to reach 150°C max and combines sequences I, II, III and IV in one bath. For security, the bath is protected by a safety cage
ACCESSORIES: Cryostat is necessary, only for a test at 24°C –NDW Tech
DELIVERED WITH
– 2
diffusers,
– 2 test
cylinders
– 2 flow
meters.
Technical Specifications
Power supply:
230V, 50Hz, 16A
Dimensions:
680x340x770mm
Weight: 36kg
Temperature bath up to 150°C (24°C- 93,5°C- 150°C)
The bath is placed in a highly protective cage.
Two test positions per bath
Electronic temperature regulation with digital display
Calibrated built-in flow meter for air flow adjustment and control
Easy coupling for inlets / outlets (colored)
RECOMMENDATIONS
Fluids for
both baths: 30 L of water for the bath at 24°C and 30 L of 10cSt silicon oil
for the bath at 93, 5°C
Bath capacity
30 liters, Methanol for cryostat
Compressed Air: Compressed dry air without particles: 95 +/- 5mL/min
Certificate on request
Zero(0) Reviews