Automatic Pensky-Martens Closed Cup Flash Point Tester
Catalog/Part Number:: K71000
Description
Test Method
For flash point determination of
biodiesel, distillate fuels, new lubricating oils, residual fuel oils, cutback
residua, used lubricating oils, mixtures of petroleum liquids with solids,
petroleum liquids that tend to form a surface film during testing.
Features
For flash point determination of
biodiesel, distillate fuels, new lubricating oils, residual fuel oils, cutback
residua, used lubricating oils, mixtures of petroleum liquids with solids,
petroleum liquids that tend to form a surface film during testing.
Description
The Automated Pensky-Martens
Flash Point Analyzer represents a perfect union of next-generation technology
with traditional robust quality. The system software runs on an integrated
processor PC running the latest Windows operating system. The 8.4” touch screen
interface fully displays all operator parameters and results on a single
screen. A three (3) position mechanical lift system for the cover and motor
assembly is fully automated and software selectable: Open – Clean – Test for
one touch positioning of the test cup. Comes standard with two flash detector
systems including a thermocouple and ionization ring detection. Over 65,000
results of data can be stored on the local hard drive. Integrated Dual Fan
System directly cools the test cup and the environment around test cup.
Unlimited number of user programs including a quick test that safely tests from
ambient, puts the flash point result into the EFP of the official run, and
prompts user to refresh the sample, virtually assuring no fires ever occur. In
addition, the instrument comes standard with an inert gas fire suppression
system.
Technical Specifications
Specifications
Conforms to the specifications
of:
ASTM D93 Procedure A, B and C; IP
34; ISO 2719; DIN EN 22719; JIS K2265; NF M 07-019
Detection System: Thermocouple
and Ionization Ring
Temperature Range: Ambient -
405°C
Heating Rate: In accordance to
ASTM D93 procedure A, B and C
Stirring Rate: 0 to 300 ± 5 RPM
Cycle Time: 5 minutes as per
rapid fan cooling system Ignition Test Frequency: User selectable on per method
basis
Cooling:
Integrated Dual Fan System: First
(1) directly to cup, Second (2) to cool environment around test cup
Barometric Pressure: Automatic
Barometric Pressure Correction
Methods & Data Storage:
Limited only by PC hard disk drive space
Temperature Calibration: Three
Types come standard:
2 Point Sample Temperature
Multipoint (>2) Temperature Calibration
CRM Calibration – Built-In
Software function to automatically correct as per CRM tested
Communication: LIMS Connectivity
via Ethernet and RS 232 ports. Two (2) USB ports (1 – Frontm 2 – Back)
Security: Three (3) level
password protection
Safety: Fire prevention,
detection, and suppression systems standard
Electrical Requirements
110-240V 50/60Hz
Dimensions
110-240V 50/60Hz
Zero(0) Reviews